|
::
Home
::
News
:: Products
:: Online Store
:: Calendar
:: Videos
:: Company
::
Links
::
Contact us
::
f.a.q.
::
Dealer locator
:: You are vistor
VS Modelsport
6408 Independence
ave. Woodland Hills,
CA. 91367
Tel: 818-888-9050
Fax: 818-704-8097
|
5-02-2008 Rule Updates
The following items are to replace the line items in the 2008 ROAR rule book.
Effective immediately these items have been updated to comply with current 1/5th scale racing requirements.
10.1.6 All bodies used in the STC class must be ROAR or IFMAR approved
10.10.9.2 Body and Wing rules:
Allow all 1/5 scale sedan bodies and all 1/5 scale coupe bodies with a "full" cabin area that seat 4 or more occupants to be legal for the Super Touring Class.
All dimensions must be within scale ± 5% of the full-size vehicle represented.
Only one single-element wing is allowed.
No dihedral is allowed.
The leading and trailing edges of the wing must be parallel.
The wing must be painted or otherwise opaque.
The body must cover the outer edge of the tires at the center of the axle when viewed from above.
10.9.6 A shut off switch must be left on the motor in the original location of manufacturer. The side window must be cut out to allow for direct access to the factory kill switch . For Formula cars, the shut off switch must be accessible from the top of the vehicle with body on.
10.3.1 Front foam bumpers are mandatory. The foam bumper must extend .5 inches (12.5mm) past the plastic bumper on all sides and a minimum of 1.4 ( 35mm) inches beyond the chassis plate. The minimum foam bumper height is 1.5 inches (40mm).
10.10.10.1 Specifications: Item Limit Specification Width (at widest point of body, excluding mirrors) Maximum 16.59"
Ground clearance at normal ride height Minimum .236"
Weight (without fuel) Minimum 9.5 Kilos
Wheels Diameter Maximum 4.2"
Tires Diameter Maximum 5.35"
Width - Front 2.95" Tire/Wheel
Assembly Width - Rear
Maximum 3.15"
Width Maximum Body width
Chord Maximum 3.35"
Side dam height Maximum 3.35"
Wing Side dam length Maximum 2.36 |
back> |
|
|
