The open Baja bodyshell with driver doll, the metal roll cage as well as the large diameter rims with low-profile knobbed tires give the Baja Buggy an unmistakable striking look. Equipped with a 26ccm engine the Baja is aggressive and a tremendous jumper.

As a FG Competition model, this car is delivered in kit form with mounting instruction. The body shell is made of clear polycarbonate for your own painting. Stickers such as headlights and letterings are included.

For the final assembly of the models you'll need the following additional items:
radio control system (transmitter, receiver), 2 steering servos ( approx. 150 Ncm / each), 1 throttle/brake servo (approx. 150 Ncm), batteries and charger.

Equipment of the FG Baja Buggy 4WD Competition:
Angled 4mm alloy chassis, belt drive, casings to cover the belt, alloy differential gear at front and rear axle with hardened bevel gearwheels, alloy front axle housing, rear alloy axle mounts and alloy wishbones at front and rear axle, alloy ball joints, adjustable turnbuckles at the track rods and at the front and rear wishbones, front alloy uprights, case-hardened steel pinions and spur gears, rear FG ball drive, front FG ball drive with cardan outer joints, adjustable alloy servo saver, 4 large-volume oil-pressure shock absorbers, hydraulic disk brake or cable activated Tuning disk brake at the front and rear wheels (depending on your choice), 26 cm³ engine, alloy engine mounts, 3-chamber tuned pipe, ready-for-use oiled OR air filter, radio plate, receiver box, unpainted clear body shell.

With the side rails and the tight fitting bodyshell the Baja Buggy is well protected against dirt from underneath. Body shell and rear wing are made of polycarbonate. Driver’s coverage and roll cage parts are made of aluminium. The giant low-profile knobbed tires are glued on white rims.

The model is equipped with a powerful 26 cm³ combustion engine with ready-for-use oiled air filter. The engine runs with normal 2-stroke petrol-oil mixture (available at every petrol station). The tank capacity of 0,7 litres enables you to run your model for about 45 minutes. With the installed pull-start system the engine can be started without any difficulties.